After building, the structure is anchored and the cover is installed. If desired the side walls can be mounted.

Download here the detailed building manual.

For the manufacturing of the covers and side panels we only use high quality materials of brands like Ferrari and Sergio Mehler. Of course, these are flame retardant materials in accordance with DIN 4102 B1, M2.

By default we offer the following materials for the covers and side panels:

Design
For the graphic design, you can use our design template. In the design template, the desired design can be inserted.If the edited design template is submitted, it is processed by us to print.

By default Airtex material with a white or grey back is used for the print. If the product is illuminated from the inside, the print beautifully lit. This effect is less when Airtex with a grey  back is applied.

When it is not desirable that the print shines through, for example for double-sided printing, you can choose for block out material. The relative heavy material (780g/m2) contains a special layer that blocks the light.

If the sides are printed on double-sided block out material, it is recommended to use Frontlit PVC material for the cover because this material has the same light gloss finish. Frontlit (450g/m2) is slightly translucent.

As an option, printing on black Airtex material is possible. For this a white backing is applied before printing colors. This method is only suitable for the printing of logos.

For a safe application of the Lounger, is has to be anchored well to the ground surface. There are several anchoring options provided for both hard and soft surfaces. The Lounger is basically only anchored on the four corners of the structure. If desired, additional intermediate anchor points may also be provided extra support to the walls. Download here the detailed anchoring instructions.

Anchoring with anchor pins
This method is ideal for installation on soft surfaces. The pin can be installed manually with a heavy sledgehammer or mechanical device. Through an optional accessory the pin can be easily pulled out of the ground.

Anchoring with screw connections
With this method the feet of structure are fixed on a hard surface using concrete screws, anchor bolts or special plugs. This anchoring method is ideal for installation on hard surfaces in which may be drilled.

Anchoring with ballast
In situations where it is not permitted to make an anchorage in the ground surface, the anchoring can be achieved by applying a ballast. We have developed a ballast system that uses commonly available concrete ballast tiles and does not interrupt connecting Lounger units and the installation of side panels. If desired the ballast tiles can be covered so they can be used as a bench or demo table.

Anchoring at a stage
If the Lounger is used as stage roofing or as part of a VIP deck, the stage can be used as anchoring. By means of standard stage clamps, the Lounger can be connected to the vertical beams of the stage.

The dimensions of the Lounger are chosen so that the product fits perfectly on the most used staging systems such as Layher (stitch 2072mm/non metric). For this the Lounger can be used as stage roofing or as part of a VIP-deck. By means of an optional mounting bracket, the Lounger feet can be connected to the vertical beams of the stage. The stage then can be used as anchor foundation.